在線除油机
YT-1200-2
On-line Oil Removal Machine
YT-1200-2
设备简介 Equipment Introduction
本机广泛应用於冷墩成型毛坯件,冷墩工件经输送机输送至甩油主机内,甩油主机利用高速离心力的原理将附著於工件表面的油脂与杂质去除干淨,PLC系统根据现场生产情况与本系统有机结合、灵活调整,真正做到无人管理智能化,节能环保规范化。
The equipment has been widely used for cold heading forming workblanks. The cold heading work-pieces are conveyed into the oil removal machine by the conveyor; in the oil removal machine, the grease and impurities attached on the surface of work-pieces are removed by virtue of high-speed centrifugal force. The PLC system is combined with this system and adjusted flexibly in accordance with the production on site, realizing unattended intelligentmanagement and standardized energy saving and environmental protection.
尺寸标注 Size Marking
技术参数 Technical Parameters
设备规格 Equipment Specification 在線除油机 YT-1200-2 On-line Oil Removal Machine YT-1200-2
额定转速 Rated Speed 1450rpm/m
最大容量 Maximum Capacity 10Kg/次 time
电源电压 Power Supply Voltage 380V·4P·50HZ
额定功率 Rated Power 1.2Kw/h
离心马达 Centrifuge Motor 0.75Kw/h
气压范围 Air Pressure Scope 0.4-0.6Mpa
启停方式 Start/Stop Mode 变频启停Start/Stop with Frequency Converter
L1尺寸 Size 550/1050/1500/2000mm
L2尺寸 Size 750mm
L3尺寸 Size 640mm
L4尺寸 Size 340mm
W1尺寸 Size 200/260/350mm
W2尺寸 Size 96/140mm
W3尺寸 Size 500mm
控制方式 Control Mode 自动控制 Automatic Control
操作面板 Operation Panel 触控屏幕 Touch Screen
输送方式 Conveying Method 磁性/链板/网带Magnetic/Chain Joint/Mesh Belt
输送马达 Conveying Motor 0.2Kw/h
适合螺母 Applicable Nuts M4mm-M22mm
适合螺丝 Applicable Screws L≤80mm Φ≤12mm
W4尺寸 Size 450mm
H1尺寸 Size 610mm
H2尺寸 Size 1512mm
H3尺寸 Size 1840mm
H4尺寸 Size 300mm-500mm可调 Adjustable
H5尺寸 Size 600mm/800mm
H6尺寸 Size 1720mm
如有特殊要求,各尺寸接受预訂。
The machine of different sizes may be customized according to particular requirements.